Skip to main content

About Hollow core ribbed slab

 HOLLOW CORE RIBBED SLAB:-

Hollowcore ribbed slabs derive their name from the voids or cores which run through the units. The cores can function as service ducts and significantly reduce the self-weight of the slabs, maximising structural efficiency. The cores also have a benefit in sustainability terms in reducing the volume of material used. Units are generally available in standard 1200 mm widths and in depths from 110mm to 400 mm. There is total freedom in length of units. This kind of slab is used where the construction has to be done fast. These kind of slabs are Pre cast slabs which are readymade.  The hollowcore ribbed slabs have between four and six longitudinal cores running through them, the primary purpose of the cores being to decrease the weight, and material within the floor, yet maintain maximal strength. To further increase the strength, the slabs are reinforced with 12mm diameter steel strand, running longitudinally. This is a one of the types of concrete slabs.

By using tower cranes Hollow slabs are inserted between the beams. The gaps between the slab is filled with screed.

Screed is a concrete material generally we use 20mm aggrgegate in concrete whereas in screed we use baby chips(small broken stones) as aggregates.

Hollow core ribbed slabs have excellent span capabilities, achieving a capacity of 2.5 kN/m2 over a 16m span. The long-span capability is ideal for offices, retail or car park developments. Units are installed with or without a structural screed, depending on requirements. Slabs arrive on-site with a smooth pre-finished soffit. In car parks and other open structures, pre-finished soffits offer a maintenance free solution.




Advantages:


  • Using hollow core ribbed slab not only reduces building costs it also reduce the overall weight of the structure.
  • Excellent fire resistance and sound insulation is the another attributes of hollow core slab due to its thickness.
  • It eliminates the need to drill in slabs for electrical and plumbing units.
  • Easy to install and requires less labor.
  • Fast in construction
  • No additional formwork or any special construction machinery is required for reinforcing the hollow block masonry.


Disadvantages:


  • If not properly handled, the hollow core ribbed slab units may be damaged during transport.
  • It becomes difficult to produce satisfactory connections between the precast members.
  • It is necessary to arrange for special equipment for lifting and moving of the precast units.
  • Not economic for small spans.
  • Difficult to repair and strengthen
Labels:

Comments

  1. Unknown13 October 2018 at 00:27

    Perfect information & the blog is almost perfect keep me updated with such kind of upcoming blogs.
    Screeding companies in Dubai

    ReplyDelete

Post a Comment

Popular posts from this blog

Hardy slab and where it use

  HARDY SLAB :- These kind of slabs are generally seen in Dubai and China. This  slab is constructed by hardy Bricks. Hardy bricks are hollow bricks and made up of concrete Hollow blocks are used to fill portions of the slab thickness it saves the  amount of concrete and hence the own weight of the slab is reduced. This kind of slab has a more thickness when compared with the conventional one. The thickness of hardy slab is 0.27m. The method of installing Hardy slab is different from normal  and it is clearly explained below: This is a one of the types of concrete slabs. The dimensions of Hardy brick is 40cm x 20cm x 20cm The process of execution is as follows: Step 1   : Formwork is arranged and then shutters are fixed on the formwork. Step 2  : Hardy blocks are placed on the shutter with one brick gap on the entire shutter. Step 3  : The gaps between the bricks are called as rib. Reinforcement is provided in a form of beam within the ...
4 comments
Read more

Waffle slab and where to use

  WAFFLE SLAB :- Waffle slab is a reinforced concrete roof or floor containing square grids with deep sides. This kind of slab is majorly used at entrance of hotels, Malls, Restaurants for good pictorial view and to install artificial lighting. This a  type of slab where we find hollow hole in the slab when the formwork is removed.  Firstly PVC trays (pods) are placed on shuttering then reinforcement is provided between the pods and steel mesh is provided at top of the pods and then concrete is filled. After concrete sets the formwork is removed and PVC pods are not removed. This forms hollow hole in it in which hole is closed at one end. The concrete waffle slab is often used for industrial and commercial buildings while wood and metal waffle slabs are used in many other construction sites. This is a one of the types of concrete slabs. Where to use? A waffle slab is a type of slab with holes underneath, giving an appearance of waffles. It is usually used where lar...
3 comments
Read more

Mix design calculation for M50 grade Concert

CONCRETE MIX DESIGN EXAMPLE – M50 GRADE CONCRETE Grade Designation = M-50 Type of cement = O.P.C-43 grade Brand of cement = Standard best quality cement Admixture = Sika [Sikament 170 ( H ) ] Fine Aggregate = Zone-II Sp. Gravity Cement = 3.15 Fine Aggregate = 2.61 Coarse Aggregate (20mm) = 2.65 Coarse Aggregate (10mm) = 2.66 Minimum Cement (As per contract) =400 kg / m3 Maximum water cement ratio (As per contract) = 0.45 Concrete Mix Design Calculation: – 1. Target Mean Strength = 50 + ( 5 X 1.65 ) = 58.25 Mpa 2. Selection of water cement ratio: Assume water cement ratio = 0.35 3. Calculation of water content: Approximate water content for 20mm max. Size of aggregate = 180 kg /m3 (As per Table No. 5 , IS : 10262 ). As plasticizer is proposed we can reduce water content by 20%. Now water content = 180 X 0.8 = 144 kg /m3 4. Calculation of cement content: Water cement ratio = 0.35 Water content per m3 of concrete = 144 kg Cement content = 144/0.35 = 411.4 k...
1 comment
Read more